Pumped Liquids

Thin, clean and non-explosive liquids without solid particles or fibres.

The pumps are able to pump liquids such as demineralised
water, softened water, sea water, cleaning solutions and light oils.

When pumping liquids with a density and/or viscosity higher than that of water, motors with correspondingly higher outputs must be used, if required.

Whether a pump is suitable for a particular liquid depends
on a number of factors of which the most important are
chloride content, pH value, temperature and content of
solvents, oils, etc.

Pump Construction:

Horizontal, multistage centrifugal pump of the non selfpriming type with extended pump/motor shaft and fitted with a mechanical shaft seal.

Compact pump unit with small physical dimensions, axial
suction port and radial discharge port.

Motor:

1. Protection class: IP54

2. Insulation class: F.

3. Frequency range: 50 / 60 Hz

4. Nominal speed: 2900 / 3500 rpm

5. Standard voltages:
    3Ø 200-240 / 380-440V 50Hz
    3Ø 200-255 / 380-480V 60Hz
 

Operating Condition

1. Ambient Temperature: Max. +40°C

2. Liquid: +0°C ~ +90°C 

3. Operating Pressure: Max. 10 kg/cm²

4. Inlet Pressure: Max. 6 kg/cm²

Model Code